Equipment Available for Hire
CGS Equipment is your trusted partner for high-quality concrete, grout, and screed equipment solutions across Australia. We offer an extensive fleet of high quality hire equipment to meet the needs of your project, large or small. Our equipment is available on a short-term or long-term hire basis, depending on your requirements.
Looking for equipment not shown below? CGS Equipment is happy to offer bespoke rental solutions to suit your specific requirements. Please contact one of our friendly team today to discuss hire options available to you.
Downloads
Products
Reed SOVA
The SOVA Gunite Machine provides a steady flow of material which allows uniform hydration and very smooth placement. The adjustable output of material can be increased without sacrificing the quality of the application. The compact SOVA is capable of spraying through hoses from 1” to 1 1/2” (25 to 38mm) inside diameter.
Pneumatically powered. Electric model also available (SOVE)
Applications:
- Structural Concrete Repair
- Refractory Spraying
- Rockscaping
- Bridge Repair
- Slope Stabilization
- Tunnels and Mine Support
- Pools and Spas
- Channels
- Piers and Sea Walls
- Sewers
- Retaining and Fire Walls
- Dams and Reservoirs
- Sand and Gravel Backfill
- Concrete Pipe Lining
- Ditches
Reed LOVA
The LOVA Gunite Machine provides a steady flow of material which allows uniform hydration and very smooth placement.
The adjustable output of material may be increased without sacrificing the quality of the application.
The compact LOVA is capable of spraying through hoses from 1” to 2” (25 to 50 mm) inside diameter.
Applications:
- Structural Concrete Repair
- Refractory Spraying
- Rockscaping
- Bridge Repair
- Slope Stabilization
- Tunnels and Mine Support
- Pools and Spas
- Channels
- Piers and Sea Walls
- Highway Renovations
- Sewers and Ditches
- Retaining and Fire Walls
- Dams and Reservoirs
- Sand and Gravel Backfill
- Concrete Pipe Lining
- Ditches
REED SOVE
The SOVE Gunite Machine provides a steady flow of material which allows uniform hydration and very smooth placement. The adjustable output of material can be increased without sacrificing the quality of the application. The compact SOVA is capable of spraying through hoses from 1” to 1 1/2” (25 to 38mm) inside diameter.
Electric powered. Pneumatic model also available (SOVA).
Applications:
- Structural Concrete Repair
- Refractory Spraying
- Rockscaping
- Bridge Repair
- Slope Stabilization
- Tunnels and Mine Support
- Pools and Spas
- Channels
- Piers and Sea Walls
- Sewers
- Retaining and Fire Walls
- Dams and Reservoirs
- Sand and Gravel Backfill
- Concrete Pipe Lining
- Ditches
PFT G4
The PFT G4 plastering machine / mortar pump is suitable for all ready-mix dry mortars based on gypsum, lime and cement.
The G4 operates continuously and fully automatically. It can be started up and refilled at any time. It can be filled with bagged material or directly from the silo/container. The material hopper is separate from the mixing and pumping unit.
The G4 offers a high conveying output and conveying distance. Due to its high flexibility, the G4 super offers a tailor-made solution for every construction site.
Applications:
- Fireproofing
- Gypsum / gypsum lime plaster
- Cement plaster
- Lime plaster
- Lime-cement render
- Fango material
- Insulation
- Insulating plaster
- Filling plasters
- Masonry mortar
- Floor screed
- Liquid filler
- Bonding/reinforcing mortar
Turbosol Poli-T
The Poli T is a modular electric worm pump. It is supplied with a built-in pan mixer and compressor, enabling both mixing and pumping from the one machine.
Continuously variable output. Large hopper discharge door and single greasing point for easy and fast cleaning and maintenance procedures. Centralized user-friendly operational controls. 120L hopper with agitator and safety grill. Easy to handle thanks to its low weight and to the pneumatic wheels.
Applications
- Common and ready-mixed masonry mortars
- Rough coats, traditional, ready-mixed and insulating plasters
- Concrete repair mortars
- Thin layer plasters, stucco and texture coatings
- Lightweight mortars and self-levelling screeds
- Cement slurry injection at controlled pressure
- Injections, geothermal injections and grouting
- Bonding and anchoring mortars
- Pressure pointing
- Slab jacking
- Fireproofing
- and much more…
Turbosol T7 EVO
The T7 EVO is a compact and lightweight single-phase worm pump. It is extremely versatile and can be combined with a wide range of accessories in order to perform various applications.
The T7 EVO is the ideal solution for spraying thin-layer coats, ready-mixed plasters and much more. If fed by an automatic mixer, the machine can be easily run by a single operator who can regulate the material flow directly from the application point. Small and manoeuvrable. Very easy to clean and maintain
Applications
- Spraying of all kind of coatings: decorative texture, protective, fireproofing, waterproofing, quartz plastic coatings, marmorino stucco and plaster
- Applying cementitious glues for insulation panels
- Applying protective coatings on reinforced concrete structures, channels and tanks
- Concrete-asbestos removal jobs
- Concrete repair jobs
- Anchoring, sealing, pressure pointing and filling frames
- Controlled pressure injection of cementitious slurries
- Slab jacking
Turbosol T20x
The T20x is a trailer-mounted hydraulic driven worm plastering machine for ready-mixed and traditional plasters. It is road registered and easily towable, offering flexibility and manoeuvrability.
It comes equipped with a lifting mixer and closed-loop hydraulic circuit for mixing, pumping, spraying and injecting common, ready-mixed, insulating and special mortars.
Applications
- Traditional site mixes and premixed dry mortars
- Insulating and fireproofing mortars
- Thixotropic mortars
- Monocoat mortars
- Rendering
- Concrete repair
- Micropiling
- Casting restoration
- Grouting
- Self-levelling floor screeds
Chemgrout CG-050
The Chemgrout CG-050 is a portable, skid mounted, air powered grout pump. The lightweight aluminium construction makes this model portable for hard to reach jobs. The holding hopper is connected directly to the suction of the grout pump to provide a continuous pumping operation. The grout pump is a 2″ positive displacement, pulsating piston. All components are easily accessible for operating, cleaning and maintenance.
Applications:
- Remediation and repair
- Reinforcing
- Marine/underwater
- Hollow metal filling
- Door frames
- Window frames
- Precast
- Machine base
- Undersealing
- Slab raising
- Encasements
Chemgrout CG-050M handpump
The ChemGrout CG-050M is a portable, skid mounted, hand operated grout pump. The lightweight aluminum design makes this grout pump perfect for smaller jobs. This unit features a 20L holding hopper and a piston pump. The holding hopper is connected directly to the suction of the pump for a continuous pumping operation. The grout pump is a 2″ positive displacement manually powered pulsating piston pump. The system disassembles without any tools for a fast and efficient cleaning.
Applications:
- Marine/underwater
- Door frames
- Window frames
- Hollow metal filling
- Precast
- Machine base
- Under sealing
- Slab raising
- Well encasements
Dust extractors
Contact us to discuss the dust extraction options available for your equipment.
Water pumps
Contact us to discuss the water pump options available.
For more information or to speak with one of our friendly sales team, please get in touch with us.
